The Valtek GS is a fully integrated valve-actuator-instrumentation package for a continuous process, non-critical flow loop controlled throughout the plant. Engineered from the ground up, the Valtek GS has achieved optimum performance at minimum total cost. It does this by pursuing the simple design philosophy of building an instrumented control valve package that is “everything it needs to be” by providing the breadth and depth of engineered control under the Valtek trusted name.
Additional information
| Valve Size | 1/2" to 6" |
|---|---|
| Pressure Class Standard | ASME B16.34 |
| Pressure Class Range | Class 150, 300 |
| Body | Globe |
| End Connections | Integral Flange |
| Face-to-Face Standard | ANSI ISA S75.08.06 |
| Bonnet | Standard, Extended, Bellows Seal |
| Packing | TA-Luft Live-Loaded: PTFE, Graphite |
| Guiding | Double Top Stem Internal to Bonnet, Cage Guided for Pressure Balanced |
| Trim | Plug & Screwed Seat, MultiStream 1-Stage Noise & Cavitation Reduction |
| Trim Characteristics | Equal Percentage, Linear, Quick-Open |
| Seating | Metal-to-Metal & Soft |
| Shut-Off Classification | ANSI FCI 70-2 Class IV, V, VI |
Features & Benefits
- Double Top Stem Guiding moves the critical function of assuring alignment of the trim out of the flow path
- Single Piece Plug & Stem assures integrity of the assembly, avoiding side load fracturing
- Oversized Stem provides greater durability for high-pressure applications
- Plug Contours provide flow characteristics with higher rangeability than cage designs
- Screwed Seat coupled with plug to seat modulation, eliminate the need for cage, increasing flow capacity
- Compact Design integrates actuation and positioner to provide lightweight, small footprint, & cost-effective design
- Bolted Bonnet eliminates service issues related to thread designs
- 1-Stage MultiStream Severe Service Trim option is available for noise and cavitation reduction
Standards & Certifications
| Certifications | Canadian Registration Number (CRN) |
|---|---|
| Safety Integrity Level (SIL) 3 Capable | |
| PED Directive 97/23/EC | |
| TA-Luft VDI 2440 (Clean Air Act) / DIN EN ISO 15848-1 | |
| Design Standards | ASME B16.5 – Pipe Flanges & Flanged Fittings |
| ASME B16.10 – Face to Face & End Dimenions of Valves | |
| ASME B16.34 – Valve Flanged, Threaded, and Welding End | |
| ASME SA Materials | |
| ASTM A Materials | |
| Quality | IS0 9001:2008 |
| ATEX QAN | |
| IECEX QAR |
Case Studies
| Flowserve-Oxygen-Valve-Safety-Awareness-fsg-148-e |
Flowserve Oxygen Valve Safety Awareness fsg 148 e.pdf |
