The Argus FK75M ball valve with its many innovative design features represents the highest standards in valve technology and is designed to meet the API-6D, ANSI 16.34 and BS 5351 requirements. Long lifetime and low operating torques due to the clear separation between the sealing and bearing functions. Split body design with superfine finished padmounted ball, anti-blow-out stem, spring loaded ball seats with cavity relief and anti-static device. Long life double stem seal system and stem supported in bearings to ensure seals are free from operating loads. Stem sealing construction complies with the latest TA-Luft and EPA (method 21) fugitive emissions requirements.
Additional information
| Valve Size | 2-1/2" to 12" |
|---|---|
| Pressure Class Standard | ASME B16.34 |
| Pressure Class Range | Class 150, 300 |
| Body | Two-Piece Split-Body |
| End Connections | Integral Flange |
| Face-to-Face Standard | ASME B16.10 |
| Bonnet | Standard, Extended High-Temperatures |
| Packing | Standard Fugitive Emissions to TA-Luft & EPA (Method 21) |
| Configuration | Floating Ball |
| Trim | Full & Reduced Port |
| Seat Type | Spring Loaded |
| Seating | Metal-to-Metal & Soft |
| Shut-Off Classification | ISO 5208 Rate A & D per API 6D |
Features & Benefits
- Improved plant and personnel safety from valve design, which meets fugitive emission standard ISO 15848
- Scalloped Seat design to prevent solids and particualte from builidng in the seat pocket
- Special bearing configurations, including cladding of critical areas and trim coating configurations, improve valve life-time
- Designed for temperatures for the highest demands on valve tightness in process and to atmosphere (FE)
- Chambered ball seats, seat pocket body design, stem seal protection and flushing system designs support valve performance and extend service life-time
- Process optimized coatings, cladding option and wearing protection feature for extended ball valve life-time
- Flushing options in critical valve areas (e.g., on seats, stem or cavity) avoid media build up to improve service-life time
- High performance designs for high pressure, metal to metal seat gas tightness solutions in oxygen service
Standards & Certifications
| Certifications | Canadian Registration Number (CRN) |
|---|---|
| PED Directive 97/23/EC | |
| Fire-Safe to API 607, ISO 10497 | |
| Anti-Static to DIN EN ISO 17292 | |
| Design Standards | API 6D – Specification for Pipeline and Piping Valves |
| ASME B16.5 – Pipe Flanges & Flanged Fittings | |
| ASME B16.10 – Face to Face & End Dimenions of Valves | |
| ASME B16.34 – Valve Flanged, Threaded, and Welding End | |
| ASME SA Materials | |
| ASTM A Materials | |
| Quality | IS0 9001:2008 |
| ATEX QAN | |
| IECEX QAR |
