The Argus HK35 ball valve with its many innovative design features represents the highest standards in valvetechnology and is designed to meet the API-6D, ANSI 16.34 and BS 5351 requirements. Long lifetime and low operating torques due to the clear separation of the sealing and bearing functions, on both ball and stem. The Argus HK35 has all the benefits of the FK76M in a high-pressure design. It is designed to perform in severe conditions where compliance to the highest demands in tightness for leak rate and fugitive emission is mandatory.
Additional information
| Valve Size | 2" to 24" |
|---|---|
| Pressure Class Standard | ASME B16.34 |
| Pressure Class Range | Class 600, 900, 1500 |
| Body | Two-Piece & Three-Piece Split-Body |
| End Connections | Integral Flange |
| Face-to-Face Standard | ASME B16.10 |
| Bonnet | Standard, Extended for Low & High-Temperatures (+1022°F) |
| Packing | Standard Fugitive Emissions to TA-Luft & EPA (Method 21) |
| Configuration | Trunnion Mounted Ball |
| Trim | Reduced & Full Port |
| Seat Type | Double Block & Bleed (DBB) |
| Seating | Metal-to-Metal & Soft |
| Shut-Off Classification | ANSI FCI 70-2 Class VI, ISO 5208 Rate A & D per API 6D |
Features & Benefits
- Designed for temperatures up to +1022°F for the highest demands on valve tightness in process and to atmosphere (FE)
- Chambered ball seats, seat pocket body design, stem seal protection and flushing system designs support valve performance and extend service life-time
- Process optimized coatings, cladding option and wearing protection feature for extended ball valve life-time
- Flushing options in critical valve areas (e.g., on seats, stem or cavity) avoid media build up to improve service-life time
- High performance designs for high pressure, metal to metal seat gas tightness solutions in oxygen service
- Seat design to FCI 70-2 Class VI to perform on highest demands zero tightness
- Reduces replacement cost as the performance capabilities of the valves can be easily upgraded and various chemical coatings can be applied to stem/seat arrangements to suit different applications
- Improves plant safety as the valves are designed to meet fugitive emission standard ISO 15848
Standards & Certifications
| Certifications | Canadian Registration Number (CRN) |
|---|---|
| PED Directive 97/23/EC | |
| Fire-Safe to API 607, ISO 10497 | |
| Oxygen Service to ASTM G124, BAM, EIGA | |
| Anti-Static to DIN EN ISO 17292 | |
| Design Standards | API 6D – Specification for Pipeline and Piping Valves |
| ASME B16.5 – Pipe Flanges & Flanged Fittings | |
| ASME B16.10 – Face to Face & End Dimenions of Valves | |
| ASME B16.34 – Valve Flanged, Threaded, and Welding End | |
| ASME SA Materials | |
| ASTM A Materials | |
| Quality | IS0 9001:2008 |
| ATEX QAN | |
| IECEX QAR |
