-
The Valtek NR diaphragm actuator is a compact actuator with high torque and pneumatic stiffness for excellent throttling capabilities. The splined shaft connection eliminates backlash for precise control. Designed for supply air pressures to 80 psi (6 Bar). The high stiffness and rolling diaphragm provides firm control from 0 to 90 degrees. -
The Valtek NT 3000 Series Electro-Pneumatic Transducer is an active I/P Transducer that is used with a milliamp electricl control signal. It is interchangeable with the XL Series or Beta Series Pneumatic Positioners and can be mounted on either Valtek Linear or Valtek Rotary Actuators without modification. -
The Model P1 is a single stage pressure reducing regulator designed for gases and liquids with inlet pressures up to 3600 psig (248 Barg) and outlet pressure up to 750 psig. It comes in a wide variety of different trim combinations to adapt to different application requirements such as Hydrogen, high-purity gases, and sour services. -
The POD series is engineered for ultimate temperature control and accessibility. It encloses the control system and required plenums in a cabinet large enough for site personnel to enter. The rear of the cabinet has a drop down ramp access to the high-pressure nitrogen cylinders for when replacements are required. Nitrogen adjustment can be made without opening the heated area.With our ability to fabricate and test in the USA and Canada, we can design to build the POD series control system to your required specifications. All engineering phases necessary will be exercised with this elite control system technology. -
The Model POSR-1 is a pressure-reducing regulator that can be used as a pressure-loaded regulator or as a pilot operated by supplying an external pilot through the main body by a tapped connection. The external pilot valve is supplied from a main valve body-tapped connection. It can handle pressure drops up to 200 psi (13.8 Bar). -
The Flowserve Limitorque QX, non-intrusive electric actuator is designed for a wide range of environmental applications in power, chemicals, water, oil & gas, and general industries. The QX design builds on more than 20 years of proven MX technology to provide all the user-preferred features in a quarter-turn smart actuator package. -
The Ranger QCT is a universal eccentric plug valve with a pneumatic spring diaphragm actuator that can be utilized in many valve applications, most common in steam service. With a different body and trim constructions, it can provide longer life on difficult services. The QCT concept (Quick Change Trim) allows access to the valve body, allowing the use of many valves inserts to meet specific application needs. This feature makes the Ranger QCT very maintenance friendly. -
The Valbart Rising Stem Ball Valve (RSBV) is the oil and gas industry's choice for applications requiring a mechanically energized metal seat or soft-seat to safeguard against losses from process contamination or leakage of material. Whether your needs call for molecular sieve switching, isomerization, thermal oil, high/low temperatures or critical services, the RSBV provides an unmatched level of robustness, reliability, and convenience. -
The Model SCV-30 is a sanitary globe or angle-style control valve for throttling or on/off service. Accessories include pneumatic or electro-pneumatic positioners. -
The Model SCV-S is a throttling pneumatically actuated control valve designed primarily for clean steam service. It can also be used in liquid and gas applications. With the use of two spring-energized stem seals to prevent leakage into the atmosphere. -
Vahn-Tech Series 100, 200, 300 & 400 are rubber lined concentric butterfly valve designed as economic solution for lower pressure isolation applications where weight and face-to-face requirements are valued greater than the rated flow capacity. -
Vahn-Tech DB Series funnel knife gate valve is used in service as a pneumatic residue discharge valve in pulp making, paper making and sewage treatment. This type of valve is well suited for high consistency media containing solids, fiber or residue, serving as a residue discharge valve on stock cleaners, gravity separators or pressurized screens. The "funnel" at the bottom of the collects waste discharged from the valve body during the closing stroke. This greatly reduces the wear between the body and gate, and prolongs the life cycle of the valve. -
Vahn-Tech DC Series knife gate valves are linear shut off valves that are light weight with compact construction. Valves are available as manual with handwheel, or can be automated with pneumatic cylinder or electric actuator for remote operation. The arc shape of the gate of our knife gate valve is designed to be particularly suitable for cutting off fluid containing fiber or suspended particles. The knife gate valves are ideal for many applications in the process industries of Pulp & Paper, Wastewater Treatment, Mining, Sugar Making and Chemical Processing. -
Vahn-Tech DF Series square knife gate valve is mainly used as pneumatic on/off valve for process control in pulp making slurry or sewage treatment. It is particularly suitable to serve as a residue discharger on equipment such as stock cleaners, gravity separators and hydra pulper in the paper making industry. -
Vahn-Tech DK Series knife gate valves are soft sealing shut off valves that are light weight with compact construction, and convenient to install and use. Valves are in full port design and with small flow resistance. When the gate is open, direct current flows between valve and pipeline. Valves can be operated manually with handwheel, or with automatic actuator for remote operation. The cone-shape design of the gates provides strong cutting force. The die-casting rubber seats are with bi-directional sealing. The main advantage of the valves is that when fully open, the medium will not flow into the valve chest, which prevents the pulp from settling in the valve chest and thus reducing the maintenance cost. -
Vahn-Tech Series DOBF is a cost-effective butterfly valve solution for isolation valve applications. Providing lighter weight, smaller face-to-face, and simple quarter-turn rotary movement, a double-offset butterfly valve design is a great solution for zero-leakage isolation relative to ball valves for large sizes. With the eccentric disc designed to reduce the rubbing of the seat it drastically reduces torque requirements for actuation while extending seat life expectancy. -
Vahn-Tech DT Series knife gate valve is mainly intended for process control in pulp slurry, residue discharge and sewage treatment. It is especially suitable for installation with equipment such as stock cleaners, gravity separators and aqua pulper. -
Vahn-Tech Series LBFV is a fluoropolymer lined concentric butterfly valve designed for chemically corrosive process medias. The design features enhanced seat energizer along with mechanically loaded packing arrangement to mitigate any media propagation past the stem. -
Noreva's NA is specially designed for gas applications having a centrally guided, single spring with very low fully open velocity. The design is focused on laying the centre of gravity of the only moving part, the disc, over the centre of the surface it is sliding on. Due to this design change, the NA is able to use softer springs, which function at very low flow rates, mainly because the tilting effect of the moving component is eliminated all together. It provides the same internal flow profiles and consequentally, the same pressure loss. -
The unique ring disc design ensures that the disc remains light and responsive even in large sizes, which is essential for rapid non-slam closure. Mounted on a multiple spring and radial guide assembly, the disc moves freely without the frictional forces. Combining two ring-shaped annular flow paths with the excellent pressure recovery properties provided by the diffuser, the minimal pressure drop across the Type N valves gives lifetime energy savings when compared to more conventional check valve designs. It is also available with the API 6D face-to-face dimensions (Series ND)
Head Office
400 – 736 6th Avenue SW
Calgary, AB T2P 3T7
Canada
Phone: 1 (855) 465-8985
Email: [email protected]
Head Office
400 – 736 6th Avenue SW
Calgary, AB T2P 3T7
Canada
Phone: 1 (855) 465-8985
Email: [email protected]
Head Office
© 2019 • N2X Process Solutions Inc.
