-
The DrainFlow Series 051000 valve is typically used for on-off bottom drain tank applications, where flushing or fluid transfer is necessary. The valve mounts flush to the tank with a plug extending into the tank and with the seat ring flush with the inner wall of the tank. The valve’s compact, lightweight design is ideal for in-line maintenance under the tank. It can be specified with either a 45° or 60° outlet angle. Other options include bellows seal, normalising fins, a special pocketfree body, steam jacketing or a plug that retracts into the body (as opposed to the standard design with an extending plug). The tank flush valve can also be supplied as a control valve. -
Double Block and Bleed Valve is a side-entry ball valve, with either a bolted or welded body, designed for use in upstream, midstream and downstream oil and gas applications. It requires two in-line isolation valves and a bleed valve used to drain or vent trapped fluid between the two closure elements in order to safely isolate the downstream pipe. This feature can be achieved with one single valves complete with a bleed port between the obturators. -
DiamondBack trim prevents cavitation from forming and minimizes hydrodynamic noise even in the most challenging liquid applications. Staged pressure drops eliminate cavitation by maintaining pressure above the vapor pressure, never allowing cavitation to form. DiamondBack combines new advances in pressure drop management with previously proven technologies to create the most effective device capable of eliminating cavitation in the most demanding services. -
The Vahn-Tech Series DFS is an economic rack and pinion style pnuematic actuator, with both captured coil spring-return and double-acting configurations. With standardized accessory (VDI/VDE 3845) and valve (ISO 5211) mounting pads, packaging with Vahn-Tech and third-party valves and accessories is simplified and easy. -
The DFS series scotch and Yoke Pneumatic Actuators are heavy-duty actuators for operating large diameter ball valves, butterfly valves, plug valves and other 90˚ rotating mechanism. Available with two yoke deigns namely symmetrical design and canted yoke design. Cylinder blocks are plated with hard chromium to increase the service life of the actuators. The piston rod and guide block connection superior surface finish and the self-lubricating bearings maximize the input energy transfer directly to the valve stem and ensure reliable operation over the service life of the actuator. Can be supplied with the complete line of controls and monitoring accessories, including hand wheel, hydraulic manual override, limit switches, solenoid valves, positioners and other control accessories. -
Cashco’s Model DA5 is a high-capacity self-contained, spring-operated, back-pressure regulator with a top-guided piston cylinder that provides high flow capacity and high-pressure drop capability. It can be utilized in different applications, but its proven specialty appeared in clean gaseous services. It can handle both an inlet pressure and pressure drop up to 675 psi. -
The Cashco Model DA4 is a high-performance, pressure-loaded diaphragm-type, flow-to-open pressure-reducing regulator. It can handle an inlet pressure of up to 3705 psi and up to 1500 psig pressure drop in multiple spring ranges. The model DA4 can be utilized in a wide variety of applications such as clean fluids, natural gas, air, oil, and corrosive and non-corrosive chemical services. With the pressure-loaded diaphragm and the balanced trim design, the DA4 can meet or exceeds that of the competitive pressure-loaded or pilot-operated designs by providing high flow capacity and high-pressure drop capability. -
The Cashco Model DA1 is a high-performance, spring-operated, flow-to-open, pressure-reducing regulator with internal pressure balancing piston-cylinder that provides high flow capacity and high-pressure drop capability. It can be utilized in different applications, but its proven specialty appeared in clean gaseous or liquid services. It can handle an inlet pressure of up to 1480 psi and an outlet pressure of 450 psi in multiple spring ranges. -
The Cashco Model D is a pressure-reducing regulator that is proven to be widely used in different applications including gases, liquids, cryogenics, and steam. One of the main features of the Model D is that it can handle mid-range pressure drops while maintaining good stability. This regulator handles inlet pressures up to 600 psig and outlet pressures up to 250 psig in multiple spring ranges. -
Ceresist's CER-1200 fine-grain alumina ceramic is next to diamond in hardness and outlasts steel by 12 times and Ni-hard by 5 times. Ceresist wear-resistant products are a long-term, maintenance-free solution in systems that experience rapid degradation due to sliding abrasion, erosion, and impact - even in highly corrosive or high-temperature services. -
Ceresist ceramic lined pipe spools are designed to outlast linings such as glass, rubber, basalt, hard facings, coatings, trowelable linings, cure-in-place linings, and plastics that are commonly used to extend the life of piping systems. These materials are only a fraction of the hardness and wear resistance of our ceramics, and in the presence of corrosion or high temperatures, most linings become severely incompatible and their use is extremely limited -
The Valbart Cryogenic Ball Valve meets demanding end-user requirements for leak rate and fugitive emission performance. It's body construction and flexible trim configurations ensure proper safe isolation. It is bi-directional (std) or uni-directional (upon request), side entry or top entry with fire-safe design, with an anti-static feature and automatic cavity relief. -
Ceramic rubber mats provide excellent erosion, impact, and sliding abrasion resistance in severely-aggressive conveying applications. The dampening effect of the rubber backing prevents damage to the ceramic wear components, adds to mat longevity, and greatly lowers noise -
Ceresist concentric and eccentric reducers are extremely cost-effective wear-preventative assets. Heavy wall thickness ceramics are installed to maximize reliability and excel in the most aggressive and erosive services. -
Ceresist ceramic line orifice plates are very versatile and extremely cost-effective wear-preventative pipe fittings. Heavy wall thickness ceramics are installed to prevent virtually any type of wear caused by ID mis-matching, yet are able to survive in the most aggressive services -
By using an extended bonnet, the packing, gaskets and seals of ColdFlow valves are protected from cryogenic temperatures, thus ensuring their sealing properties. Optional special gaskets and packing can be used to operate at temperatures as low as -69 °C. Depending on the application, Flowserve cryogenic valves are available with a top entry design for the easy maintenance of valves located in a cold box or with a simple extended bonnet attached to the valve body. -
In the food and beverage industry as well as in biotechnology, pharmacy and other areas where perfect cleanliness and sterile valves are required, Flowserve has the solution. Our products meet the USDA and 3A requirements and can be supplied for Clean In Place (CIP) and Steam In Place (SIP). -
Ceresist ceramic-lined chokes are specified for use in extremely erosive slurries that contain a very high percentage of solids. The large radius entry of the chokes exhibit better consistency and flow recovery characteristics than sharp-edged orifice plates. Furthermore, our ceramic-lined chokes are more compact than venturi-style chokes. The silicon carbide ceramic choke insert is 30 times more wear-resistant than stainless steel, and offers years of maintenance-free service. -
ChannelStream trim prevents cavitation from forming and minimizes hydrodynamic noise even in the most challenging liquid applications. Staged pressure drops eliminate cavitation by maintaining pressure above the vapor pressure, never allowing cavitation to form. -
Ceresist flange adapters are very versatile and extremely cost-effective wear-preventativeitems. Heavy wall thickness ceramics are installed to prevent virtually any type of wear caused by ID mis-matching, yet are able to survive in the most aggressive services.
Head Office
400 – 736 6th Avenue SW
Calgary, AB T2P 3T7
Canada
Phone: 1 (855) 465-8985
Email: [email protected]
Head Office
400 – 736 6th Avenue SW
Calgary, AB T2P 3T7
Canada
Phone: 1 (855) 465-8985
Email: [email protected]
Head Office
© 2019 • N2X Process Solutions Inc.
