-
In the food and beverage industry as well as in biotechnology, pharmacy and other areas where perfect cleanliness and sterile valves are required, Flowserve has the solution. Our products meet the USDA and 3A requirements and can be supplied for Clean In Place (CIP) and Steam In Place (SIP). -
The HPFlow is designed for high pressure applications up to 60,000 psi for very special needs. With the unique split body design it is possible to clamp the seat in between the body parts to handle these extreme pressure ratings. In combination with high pressure there is very often the need to handle also high diferential pressure. In this case the HPFlow series offers an axial multi-stage trim design. -
The Mark One-X offers a cost-effective means of installing a small valve in a much larger line without line reducers or expanders. It is identical to a standard Mark One except for its body, which has expanded outlets. -
The Valtek ShearStream is a segmented, ball control valve that provides exceptional control and rangeability for the process industries. Designed to overcome the problems of harsh, particle entrained processes, ShearStream also provides accurate, reliable control in a broad range of applications, such as chemical, power and petroleum. -
Setball Segmented Ball Valves are cost-competitive general service valves that offer excellent rangeability and high-flow capacity. NAF Setball can be used in a wide variety of applications and meets the highest demands for control accuracy provided by the equal percentage characteristic and the splined connection between shaft and sector. -
The NAF Setball SF valve is a cost-competitive, compact, rotary control, V-port ball sector valve that offers excellent rangeability and high-flow capacity. In comparison to the NAF Setball, the Setball SF offers a compact design with a short face-to-face. -
The NAF Setball for Middle Consistency (MC) pulp is a ball sector valve with metal-to-metal seating and combines the best control characteristics of the ball valve and the butterfly valve. It can be used both as control valve and as shut-off valve and is available in flanged version. This valve type is developed for MC-pulp 8-19%. It has an enlarged outlet with one size bigger flange on the outlet to get an excellent flow characteristic for the MC-pulp out of the valve. It is available as standard in 1.4408/CF8M, CG8M and SMO254. -
NAF Setball ProCap Segmented Ball Valves are unique high-tech capping valves designed for automated filling of wood chips for batch digester applications in the pulp industry. -
The Duball DL is a high-performance, metal-seated, full-bore ball valve, equally suitable for isolation, on-off and modulating control applications. The excellent characteristics of NAF Duball DL are particularly beneficial under the most challenging operating conditions in the process industry, where difficult media and demanding pressure conditions make severe demands on the design, materials and performance. -
The NAF Duball DL Pocket Valve is the pulp and paper industry’s choice for a reliable and robust valve solution that allows for safe removal of sand or debris in separator and junk trap applications during normal process operation. Building on years of experience in providing flow control solutions in harsh environments, the Duball DL Pocket Valve is specifically designed to ensure continuous process uptime and throughput by allowing process pressure to be maintained while unwanted process particles are eliminated. -
The NAF Duball DL Ceramic is a ball valve that is internally lined with ceramic for erosive and abrasive media. It is primarily intended for control but has a sealing class as for a shut-off valve. The valve represents a concrete result of our product philosophy which is focused on functionality, high quality and low life cycle costs, and is based on concentrating our range to a limited number of valve types, but all of them suitable for a wide variety of applications. -
The NAF Trunnball DL is a full-bore trunnion-mounted ball valve, developed by Flowserve engineers with more than 80 years of experience manufacturing ball valves. The ball is supported by two large, low friction trunnion bearings for consistent low torque even at high differential pressures. Due to its bi-directional tightness, low friction and high controllability, it is an excellent choice for isolation, on/off and modulating control applications. -
The MaxFlo 4 is a high-performance eccentric rotary plug control valve. The flow path is unobstructed by the shaft, allowing higher capacity for a given valve size. This noncrossover shaft design also eliminates shaft damage from erosive process fluids. The shaft is designed per ASME B16.34 Section 6.5 to prevent the stem from being removed while the valve is under pressure for increased safety. -
The Valtek Valdisk valve is a high-performance butterfly control valve. Its double-offset shaft provides eccentric-cammed disc rotation to lift it out of the seat, thus immediately eliminating seat friction, to improve throttling control and reduce seat wear. A one-piece splined shaft connected to a clamped actuator lever provides excellent throttling control. Its soft seating arrangement is designed for bubble-tight shutoff while maintaining low breakout torque. -
A three-way version of the widely used Valtek Mark One valve, the Valtek Mark One 3-Way valve is used for combining or diverting service. Like the Mark One, it offers superior performance in liquid and gaseous services in simple, rugged design. -
The Valtek Mark Eight control valve features a unique Y-style globe body that provides higher flow capacities and less process turbulence than conventional globe valves. -
The DrainFlow Series 051000 valve is typically used for on-off bottom drain tank applications, where flushing or fluid transfer is necessary. The valve mounts flush to the tank with a plug extending into the tank and with the seat ring flush with the inner wall of the tank. The valve’s compact, lightweight design is ideal for in-line maintenance under the tank. It can be specified with either a 45° or 60° outlet angle. Other options include bellows seal, normalising fins, a special pocketfree body, steam jacketing or a plug that retracts into the body (as opposed to the standard design with an extending plug). The tank flush valve can also be supplied as a control valve. -
The Flowserve Valtek Mark Six is a globe-style, single-seat, top-entry automatic control valve with a fabricated extension for cold box cryogenic applications to -425°F/‑218°C. Mark Six bodies are constructed of bronze or austenitic stainless steel for high impact strength at low temperature and minimum heat transfer. Mark Six is designed for high flow capacity with a minimum of mass to reduce boil-off on valve cool-down. -
Kammer SmallFlow micro flow and low flow valves are designed for applications in a Cv range from 0.000063 to 4.7. The have high rangeability and reproduceable trim characteristics. Standard designs as well as special applications or materials available. -
Many years of experience in the manufacture of lined ball and plug valves and the sophisticated experience of manufacturing excellent reproducible trims for linear valves are combined in this new product. High quality lining materials such as PFA (standard), PVDF, PP, ETFE and FEP as well as PFA antistatic, cover most mediums and applications. The revolutionary PTFE bellows design allows a standard pressure rating of CL150. The increased flow capacity means that the most economical valve can be chosen for the application.
Head Office
400 – 736 6th Avenue SW
Calgary, AB T2P 3T7
Canada
Phone: 1 (855) 465-8985
Email: [email protected]
Head Office
400 – 736 6th Avenue SW
Calgary, AB T2P 3T7
Canada
Phone: 1 (855) 465-8985
Email: [email protected]
Head Office
© 2019 • N2X Process Solutions Inc.
