Cashco.

Home>Cashco
  • Cashco model 1000HP is a high performance self contained pressure reducing regulator. The unique internal design and the straight-through flow path plays a significant role in isolating the diaphragm from fluid velocity effects and increasing capacity and stability at both high or flow rates. The model 1000HP was designed to be utilized in different applications such as steam, industrial gases, air, and water condensate for an inlet pressure of up to 740 psig and outlet pressure of up to 300 psig.
    High Capacity/High Pressure
  • The Model 1049 offers the best pilot-operated vent technology on the market today. The unit allows for bubble-tight seat leakage until the pilot starts to exhaust. At that time, the vent starts to open and is fully open at 10% overpressure. Unlike non-pilot operated units that require substantial overpressure in order to obtain full lift. On Model 1049, the blowdown is limited, and the valve reseats at the set point, where the non-pilot-operated units will go below the set point in order to reseat. 
    Pilot Operated Vent Valve
  • Field Calibration Kit (This is just a calibration kit that can be added to model 1078)
  • The Model 1078 is a pilot-operated valve specifically designed to reduce blanketing gas losses on low-pressure storage tanks. It opens and closes automatically as required to maintain a closely controlled blanket pressure. The simple design increases reliability and lowers maintenance costs. 
    Pilot-Operated Single Valve
  • The Model 1088 is a valve specifically designed for small tank blanketing applications. It opens and closes automatically as required to maintain a closely controlled blanket pressure. Standard valve material provides added corrosion protection at no additional cost The simple design increases reliability and lowers maintenance cost. 
    Small Tank Blanketing Valve
  • The Model 1100 is a stainless steel sanitary vent designed to operate at multiple set points as a breather valve to avoid vacuum or over-pressurization inside a tank or piping system. This unit comes with a true sanitary blanketing connection and is designed so that it can be used with our sanitary blanketing valve; VCI model 1088.  
    Sanitary Quick Vent
  • The Model 2049 manifold is designed to allow a very compact installation of a blanketing valve and vent valve on one single tank nozzle. 
    Tank Manifold
  • The Model 2100 provides ready access to storage tanks for gauging or obtaining samples. The gauge hatch may also provide additional pressure relief as a supplement for normal or emergency venting. These gauge hatches are intended for use where the fire protection afforded by flame arresters is not considered necessary. Common applications where it is commonly used includes atmospheric and low pressure tanks.
    Non-Locking Gauging Hatch
  • The Model 2199 pressure/vacuum relief hatch provides overpressure relief beyond that furnished by the normal pressure vent for atmospheric and low-pressure tanks. The Model 2199 can also be used as a spring-operated conservation vent and tank hatch that provides convenient access for tank cleaning, inspection, and repair.
    Spring-Operated Relief Vent
  • Cashco’s Model 3200 in-line conservation breather vent is part of the Valve Concepts, Inc. modular vent product line. The Model 3200 can easily be field converted to a vacuum-only vent, a pressure/vacuum vent to the atmosphere, and can either be direct acting or pilot operated. Only Valve Concepts offers complete modularity throughout its complete vent product line. 
    Pressure / Vacuum Vent with Pipe-away
  • The Model 3300 end-of-line conservation breather vent is part of Valve Concepts, Inc. modular vent product line. The Model 3300 can easily be field converted to an end-of-line pressure/vacuum relief vent with the addition of weather hood components or an in-line pressure/vacuum relief with the addition of pipe away body components. 
    Top Mounted Vacuum Relief Vent
  • Model 3400 is lightweight for easy handling, inspection, and maintenance. A coarse mesh screen prevents entry of foreign matter into the seating area. 
    Pressure Vent to Atmosphere
  • The Model 3500 pressure-only vent with pipe-away is part of the Valve Concepts, Inc. modular vent product line. The Model 3500 is used in the 3200, 4200, and 5200 pressure/vacuum vents with pipe away and the Model 3600 side-mounted vacuum vent. 
    Pressure Relief Vent to Header
  • The Model 3600 end-of-line conservation breather vent is part of Valve Concepts, Inc. modular vent product line. The Model 3600 can easily be field converted to a pressure-only vent, a pressure/vacuum vent with pipe away, and can either be direct acting or pilot operated. Only Valve Concepts offers complete modularity throughout its complete vent product line. 
    Side-Mounted Vacuum Relief Vent
  • The Model 3700 manhole and emergency pressure vents provide emergency pressure relief beyond that furnished by the normal pressure vent for atmospheric and low-pressure tanks, as well as providing convenient access for tank cleaning, inspection, and repair. Emergency relief valves provide relief from excessive internal pressure, which an abnormal condition, such as ruptured internal heating coils or an external fire may cause. 
    Manhole and Emergency Pressure Vent
  • The Model 3K00 Pressure / Vacuum Vent is designed for use on atmospheric and low-pressure storage tanks where pressure and vacuum relief are required. Weight-loaded pallets in the vent housing allow the intake of air and the escape of vapors as the tank breathes due to thermal changes and product movement in and out of the tank. The pallets open and close to permit in-breathing and out-breathing necessary to maintain the tank pressure within permissible limits to avoid damage to the tank. 
    Pallet assembly Pressure / Vacuum Vent
  • The Model 4100 end-of-line spring-loaded conservation vent provides pressure and vacuum relief in applications where higher-pressure settings are required.the model 4100 can easily be field converted to a vacuum-only vent, or a pressure/vacuum vent. 
    End-of Line-Pressure/Vacuum Vent
  • The Model 4200 pipe-away conservation vent is part of the Valve Concepts, Inc. modular vent product line. The Model 4200 can easily be converted to a vacuum-only vent or end-of-line pressure/vacuum vent and can either be direct-acting or pilot-operated. Only Valve Concepts, Inc. offers complete modularity throughout its complete vent product line. 
    Pressure/Vacuum Spring Loaded Vent
  • The Model 4300 end-of-line spring-loaded vacuum vent is intended for use on storage tanks, vapor recovery systems, and process systems where higher vacuum relief settings are required. 
    End-Of-Line Spring Loaded Vacuum Vent
  • The Model 4400 spring-loaded pressure relief vents are designed for higher pressure settings and are used in applications for normal or emergency venting pressure relief. The series 4400 vents are pressure-only devices and, as such, do not provide vacuum relief. 
    Spring Loaded Pressure Vent To Atmosphere ( OR) Pressure Relief Vent To Atmosphere
  • The Model 4500 spring-loaded pressure vent with pipe away is intended for use where higher set pressures are required, and the relieving vapors must be piped away and not emitted into the atmosphere. May also be used for in-line vacuum relief. 
    Pressure Vent with Pipe-Away
  • The Model 4600 spring-loaded vacuum relief vents are intended for use on low-pressure tanks, vapor recovery systems, and process systems where higher vacuum relief is required. 
    Side-Mounted Vacuum Relief Vent
  • The Model 5100 end-of-line conservation breather vent is intended for use on atmospheric and low-pressure storage tanks where pressure and vacuum relief is required. 
    End-Of-Line Relief Vent
  • The Pilot Operated Model 5200 vent provides pressure and vacuum relief in applications that require vapors to be piped away. 
    Pilot Operated Vent with Pipe-Away
  • The Model 5400 is designed for use on atmospheric and low-pressure tanks to reduce environmental emissions and product losses, when operating close to the set point. 
    Pressure Only Relief Vent
  • The Pilot Operated Model 5500 conservation pressure vent with pipe-away is intended for use where pressure relief is required and the relieving vapors must be piped away and not emitted into the atmosphere. May also be used for in-line vacuum relief. 
    Pressure Vent w/ Pipe-away Connection
  • The Model 6K00 Pressure / Vacuum Vent with Flame Arrestor is designed for use on atmospheric and low-pressure storage tanks where pressure and vacuum relief are required. The model 6K00 is used as an independent safety system to ensure explosion protection. 
    Pressure / Vacuum Vent with Flame Arrestor
  • The Model 8700 emergency pressure/vacuum vents provide emergency pressure and vacuum relief beyond that furnished by the normal pressure vent for atmospheric and low-pressure tanks, as well as providing convenient access for tank cleaning, inspection, and repair. The vacuum relief allows the intake of air necessary to maintain the tank pressure within the permissible vacuum limit to avoid damage to the tank.
    Pressure/Vacuum Relief Vent
  • The 8900 Series manway pressure and pressure/vacuum relief vents provide emergency pressure relief beyond that furnished by the normal pressure vent for atmospheric and low-pressure tanks, as well as convenient access for tank cleaning, inspection, and repair.  Emergency relief vents provide relief from excessive internal pressure which may be caused by an abnormal condition; such as ruptured internal heating coils, an external fire, a failure of the tank blanketing system, a sudden cooling of the tank or a break in the tank wall.
    Flange Base Relief Vent
  • The Model BQ is a relief regulator suitable as a back pressure regulator or bypass valve for controlling inlet pressures between 5 and 300 psig (0.34 to 20.7 Barg). This model is designed for controlling a wide range of fluids, including air, inert gases, cryogenic gas or liquids, chemicals, water, fuel oil, and steam.
    General Service
  • Cashco’s Model CA-2 is a compact bronze or stainless steel back pressure regulator used to control inlet pressure levels between atmospheric and 610 psig (42.0 Barg) by relieving excess pressure. This model can be utilized in various services such as liquid recirculation around pumps, cryogenic gas, or liquid or sour service and can be used as a bypass flow regulator in fuel oil systems.
    Compact 1/8”- ¼” NPT
  • The Cashco Model D is a pressure-reducing regulator that is proven to be widely used in different applications including gases, liquids, cryogenics, and steam. One of the main features of the Model D is that it can handle mid-range pressure drops while maintaining good stability. This regulator handles inlet pressures up to 600 psig and outlet pressures up to 250 psig in multiple spring ranges.
    General Service
  • The Cashco Model DA1 is a high-performance, spring-operated, flow-to-open, pressure-reducing regulator with internal pressure balancing piston-cylinder that provides high flow capacity and high-pressure drop capability. It can be utilized in different applications, but its proven specialty appeared in clean gaseous or liquid services. It can handle an inlet pressure of up to 1480 psi and an outlet pressure of 450 psi in multiple spring ranges.
    High Performance Spring Loaded
  • The Cashco Model DA4 is a high-performance, pressure-loaded diaphragm-type, flow-to-open pressure-reducing regulator. It can handle an inlet pressure of up to 3705 psi and up to 1500 psig pressure drop in multiple spring ranges. The model DA4 can be utilized in a wide variety of applications such as clean fluids, natural gas, air, oil, and corrosive and non-corrosive chemical services. With the pressure-loaded diaphragm and the balanced trim design, the DA4 can meet or exceeds that of the competitive pressure-loaded or pilot-operated designs by providing high flow capacity and high-pressure drop capability.
    High Performance Pressure Loaded Diaphragm
  • Cashco’s Model DA5 is a high-capacity self-contained, spring-operated, back-pressure regulator with a top-guided piston cylinder that provides high flow capacity and high-pressure drop capability. It can be utilized in different applications, but its proven specialty appeared in clean gaseous services. It can handle both an inlet pressure and pressure drop up to 675 psi.
    High Performance
  • The Cashco’s Model HP-1+6+S is a heavy-duty, high-pressure reducing differential regulator. The internal trim is of a pressure-balanced design, with the diaphragm having both up and down stops. Inlet pressure may be as high as 3000 psig (207 Barg). Outlet pressure may be as high as 1500 psig (103 Barg). Differential pressure may vary from 15-150 psid (1.0-10.3 Bard). The model HP-1+6+S is most used in gaseous and non-cavitating liquid services.
    Differential Pressure
  • The Model 2296 is a competitive globe control valve. Available in stainless steel or bronze body material, it can be utilized in plant utility and process applications. This model is available in various end connections such as raised face flanged, extended nipples and NPT.
    Commodity General Service
  • The Model 3100 end-of-line conservation breather vent is designed for use on atmospheric and low-pressure storage tanks where pressure and vacuum relief are required. Weight-loaded pallets in the vent housing allow the intake of air and the escape of vapors as the tank breathes due to thermal changes and product movement in and out of the tank. The pallets open and close to permit in-breathing and out-breathing necessary to maintain the tank pressure within permissible limits to avoid damage to the tank.
    Pressure/Vacuum Vent
  • The Model 4381 is a stainless steel pressure-reducing regulator designed to handle small to mid-capacity flow rates in general. This model is capable of controlling outlet pressure to a level between 2 and 500 psig (0.14 and 34.5 Barg) with a maximum inlet pressure up to 1500 psig. By having thirteen different trim combinations with the option of a soft or metal seat, the model 4381 can be utilized in different applications such as industrial gases, air, oil, steam, water, and, chemical or cryogenic services.
    Low to Mid Capacity
  • Pneumatic Control Valve that can be utilized in general service. The body/trim comes in a variety of material selection that includes Ductile Iron ASTM: A395, Carbon Steel (WCB). Model 964 comes in two different seat constructions: metal (Class IV) and a composition seat (Class VI). This model is available in flanged, socket weld, or NPT.
    General Service Linear
  • Pneumatic Control Valve that can be utilized in general and chemical service. The body/trim comes in a variety of material selection that includes:  WCB/316L SST, CF3M/316L SST, or CW-12MW/Hast. Model 988 comes in two different seat constructions: metal and (Class IV) and a composition seat (Class VI). This model is available in various end connections such as raised face flanged, socket weld and NPT.
    General & Chemical Service
  • Pneumatic Control Valve that can be utilized in general and chemical service. The body/trim comes in a variety of material selection that includes:  WCB/316L SST, CF3M/316L SST. Model 989 comes in two different seat constructions: metal and (Class IV) and a composition seat (Class VI). This model is available in flanged.
    General & Chemical Service Cl 150-300
  • The Model P1 is a single stage pressure reducing regulator designed for gases and liquids with inlet pressures up to 3600 psig (248 Barg) and outlet pressure up to 750 psig. It comes in a wide variety of different trim combinations to adapt to different application requirements such as Hydrogen, high-purity gases, and sour services.
    High Pressure 1/4" – ½”
  • The Model POSR-1 is a pressure-reducing regulator that can be used as a pressure-loaded regulator or as a pilot operated by supplying an external pilot through the main body by a tapped connection. The external pilot valve is supplied from a main valve body-tapped connection. It can handle pressure drops up to 200 psi (13.8 Bar).
    Pilot Operated
  • The Ranger QCT is a universal eccentric plug valve with a pneumatic spring diaphragm actuator that can be utilized in many valve applications, most common in steam service. With a different body and trim constructions, it can provide longer life on difficult services. The QCT concept (Quick Change Trim) allows access to the valve body, allowing the use of many valves inserts to meet specific application needs. This feature makes the Ranger QCT very maintenance friendly.
    Eccentric Plug Rotary
  • The Model SCV-30 is a sanitary globe or angle-style control valve for throttling or on/off service. Accessories include pneumatic or electro-pneumatic positioners.
    Low Pressure Sanitary Service
  • The Model SCV-S is a throttling pneumatically actuated control valve designed primarily for clean steam service. It can also be used in liquid and gas applications. With the use of two spring-energized stem seals to prevent leakage into the atmosphere.
    Sanitary Service