-
Cashco model 1000HP is a high performance self contained pressure reducing regulator. The unique internal design and the straight-through flow path plays a significant role in isolating the diaphragm from fluid velocity effects and increasing capacity and stability at both high or flow rates. The model 1000HP was designed to be utilized in different applications such as steam, industrial gases, air, and water condensate for an inlet pressure of up to 740 psig and outlet pressure of up to 300 psig. -
The Model 1049 offers the best pilot-operated vent technology on the market today. The unit allows for bubble-tight seat leakage until the pilot starts to exhaust. At that time, the vent starts to open and is fully open at 10% overpressure. Unlike non-pilot operated units that require substantial overpressure in order to obtain full lift. On Model 1049, the blowdown is limited, and the valve reseats at the set point, where the non-pilot-operated units will go below the set point in order to reseat. -
The Model 1078 is a pilot-operated valve specifically designed to reduce blanketing gas losses on low-pressure storage tanks. It opens and closes automatically as required to maintain a closely controlled blanket pressure. The simple design increases reliability and lowers maintenance costs. -
The Model 1088 is a valve specifically designed for small tank blanketing applications. It opens and closes automatically as required to maintain a closely controlled blanket pressure. Standard valve material provides added corrosion protection at no additional cost The simple design increases reliability and lowers maintenance cost. -
The Model 1100 is a stainless steel sanitary vent designed to operate at multiple set points as a breather valve to avoid vacuum or over-pressurization inside a tank or piping system. This unit comes with a true sanitary blanketing connection and is designed so that it can be used with our sanitary blanketing valve; VCI model 1088. -
The Model 2049 manifold is designed to allow a very compact installation of a blanketing valve and vent valve on one single tank nozzle. -
The Model 2100 provides ready access to storage tanks for gauging or obtaining samples. The gauge hatch may also provide additional pressure relief as a supplement for normal or emergency venting. These gauge hatches are intended for use where the fire protection afforded by flame arresters is not considered necessary. Common applications where it is commonly used includes atmospheric and low pressure tanks. -
The Model 2199 pressure/vacuum relief hatch provides overpressure relief beyond that furnished by the normal pressure vent for atmospheric and low-pressure tanks. The Model 2199 can also be used as a spring-operated conservation vent and tank hatch that provides convenient access for tank cleaning, inspection, and repair. -
Cashco’s Model 3200 in-line conservation breather vent is part of the Valve Concepts, Inc. modular vent product line. The Model 3200 can easily be field converted to a vacuum-only vent, a pressure/vacuum vent to the atmosphere, and can either be direct acting or pilot operated. Only Valve Concepts offers complete modularity throughout its complete vent product line. -
The Flowserve Logix 3200MD Digital HART positioner utilizes state-of-the-art piezo technology to provide superior performance and reliability. The Logix 3200MD can be easily configured using the local buttons, HART handheld, and SoftTools software. -
The Logix™ 3200MD+ Digital HART Positioner from Flowserve utilizes state-of-the-art piezo technology to provide superior performance and reliability. The Logix 3200MD+ can be easily configured using the local buttons or the ValveSight™ DTM. The Logix 3200MD+ is designed to withstand severe environments; it is equipped with over 100 helpful warning alarms that can warn against potential failure of the valve, actuator and positioner. When utilized with the ValveSight DTM Software many diagnostic tools are available to quickly diagnose problems and potential issues. -
The Model 3300 end-of-line conservation breather vent is part of Valve Concepts, Inc. modular vent product line. The Model 3300 can easily be field converted to an end-of-line pressure/vacuum relief vent with the addition of weather hood components or an in-line pressure/vacuum relief with the addition of pipe away body components. -
Model 3400 is lightweight for easy handling, inspection, and maintenance. A coarse mesh screen prevents entry of foreign matter into the seating area. -
The Flowserve Logix 3400MD Digital Foundation Fieldbus positioner utilizes state-of-the-art piezo technology to provide superior performance and reliability. The Logix 3400MD can be easily configured using the local buttons or the ValveSight DTM. Logix 3400MD has a complete diagnostics package that can alert the user to developing conditions that may cause unnecessary upset conditions in the plant. -
The Model 3500 pressure-only vent with pipe-away is part of the Valve Concepts, Inc. modular vent product line. The Model 3500 is used in the 3200, 4200, and 5200 pressure/vacuum vents with pipe away and the Model 3600 side-mounted vacuum vent. -
The Model 3600 end-of-line conservation breather vent is part of Valve Concepts, Inc. modular vent product line. The Model 3600 can easily be field converted to a pressure-only vent, a pressure/vacuum vent with pipe away, and can either be direct acting or pilot operated. Only Valve Concepts offers complete modularity throughout its complete vent product line. -
The Model 3700 manhole and emergency pressure vents provide emergency pressure relief beyond that furnished by the normal pressure vent for atmospheric and low-pressure tanks, as well as providing convenient access for tank cleaning, inspection, and repair. Emergency relief valves provide relief from excessive internal pressure, which an abnormal condition, such as ruptured internal heating coils or an external fire may cause. -
Compatible with linear and rotary valves and actuators, Logix 3800 digital positioner delivers high reliability in tough environments. It provides unparalleled modularity and versatility within a single unit. Its ability to handle double- or single-acting, linear and rotary applications reduces inventory and operating costs. Installation is simplified with an innovative, one-button quick calibration feature.
Head Office
400 – 736 6th Avenue SW
Calgary, AB T2P 3T7
Canada
Phone: 1 (855) 465-8985
Email: [email protected]
Head Office
400 – 736 6th Avenue SW
Calgary, AB T2P 3T7
Canada
Phone: 1 (855) 465-8985
Email: [email protected]
Head Office
© 2019 • N2X Process Solutions Inc.
