-
The Model 5400 is designed for use on atmospheric and low-pressure tanks to reduce environmental emissions and product losses, when operating close to the set point. -
The Pilot Operated Model 5200 vent provides pressure and vacuum relief in applications that require vapors to be piped away. -
The Model 4600 spring-loaded vacuum relief vents are intended for use on low-pressure tanks, vapor recovery systems, and process systems where higher vacuum relief is required. -
The Model 4100 end-of-line spring-loaded conservation vent provides pressure and vacuum relief in applications where higher-pressure settings are required.the model 4100 can easily be field converted to a vacuum-only vent, or a pressure/vacuum vent. -
The Model 4500 spring-loaded pressure vent with pipe away is intended for use where higher set pressures are required, and the relieving vapors must be piped away and not emitted into the atmosphere. May also be used for in-line vacuum relief. -
The Model 4400 spring-loaded pressure relief vents are designed for higher pressure settings and are used in applications for normal or emergency venting pressure relief. The series 4400 vents are pressure-only devices and, as such, do not provide vacuum relief. -
The Model 4300 end-of-line spring-loaded vacuum vent is intended for use on storage tanks, vapor recovery systems, and process systems where higher vacuum relief settings are required. -
The Model 4200 pipe-away conservation vent is part of the Valve Concepts, Inc. modular vent product line. The Model 4200 can easily be converted to a vacuum-only vent or end-of-line pressure/vacuum vent and can either be direct-acting or pilot-operated. Only Valve Concepts, Inc. offers complete modularity throughout its complete vent product line. -
The Model 1100 is a stainless steel sanitary vent designed to operate at multiple set points as a breather valve to avoid vacuum or over-pressurization inside a tank or piping system. This unit comes with a true sanitary blanketing connection and is designed so that it can be used with our sanitary blanketing valve; VCI model 1088. -
The Model 1078 is a pilot-operated valve specifically designed to reduce blanketing gas losses on low-pressure storage tanks. It opens and closes automatically as required to maintain a closely controlled blanket pressure. The simple design increases reliability and lowers maintenance costs. -
The Model 1088 is a valve specifically designed for small tank blanketing applications. It opens and closes automatically as required to maintain a closely controlled blanket pressure. Standard valve material provides added corrosion protection at no additional cost The simple design increases reliability and lowers maintenance cost. -
The Model 2049 manifold is designed to allow a very compact installation of a blanketing valve and vent valve on one single tank nozzle. -
The Model 2199 pressure/vacuum relief hatch provides overpressure relief beyond that furnished by the normal pressure vent for atmospheric and low-pressure tanks. The Model 2199 can also be used as a spring-operated conservation vent and tank hatch that provides convenient access for tank cleaning, inspection, and repair. -
The Model 2100 provides ready access to storage tanks for gauging or obtaining samples. The gauge hatch may also provide additional pressure relief as a supplement for normal or emergency venting. These gauge hatches are intended for use where the fire protection afforded by flame arresters is not considered necessary. Common applications where it is commonly used includes atmospheric and low pressure tanks. -
The 8900 Series manway pressure and pressure/vacuum relief vents provide emergency pressure relief beyond that furnished by the normal pressure vent for atmospheric and low-pressure tanks, as well as convenient access for tank cleaning, inspection, and repair. Emergency relief vents provide relief from excessive internal pressure which may be caused by an abnormal condition; such as ruptured internal heating coils, an external fire, a failure of the tank blanketing system, a sudden cooling of the tank or a break in the tank wall. -
The Model 3700 manhole and emergency pressure vents provide emergency pressure relief beyond that furnished by the normal pressure vent for atmospheric and low-pressure tanks, as well as providing convenient access for tank cleaning, inspection, and repair. Emergency relief valves provide relief from excessive internal pressure, which an abnormal condition, such as ruptured internal heating coils or an external fire may cause. -
The Model 8700 emergency pressure/vacuum vents provide emergency pressure and vacuum relief beyond that furnished by the normal pressure vent for atmospheric and low-pressure tanks, as well as providing convenient access for tank cleaning, inspection, and repair. The vacuum relief allows the intake of air necessary to maintain the tank pressure within the permissible vacuum limit to avoid damage to the tank. -
Ceresist ceramic-lined elbows are designed to outlast linings such as glass, rubber, basalt, hard-facings, and coatings that are commonly used to extend the life of piping systems. All pipe and fittings feature extremely wear resistant ceramics that are also exceptionally corrosion-resistant. -
Ceresist flange adapters are very versatile and extremely cost-effective wear-preventativeitems. Heavy wall thickness ceramics are installed to prevent virtually any type of wear caused by ID mis-matching, yet are able to survive in the most aggressive services. -
The Vahn-Tech Series TOV and TOBF triple offset butterfly valves are designed to meet the critical zero-leakage isolation requirements for industry applications. Split into two primary design categories, floating and fixed seats, there's versatility in the selection to match your process requirements and project economics. -
Vahn-Tech Series LBFV is a fluoropolymer lined concentric butterfly valve designed for chemically corrosive process medias. The design features enhanced seat energizer along with mechanically loaded packing arrangement to mitigate any media propagation past the stem. -
Vahn-Tech Series 100, 200, 300 & 400 are rubber lined concentric butterfly valve designed as economic solution for lower pressure isolation applications where weight and face-to-face requirements are valued greater than the rated flow capacity. -
Vahn-Tech DC Series knife gate valves are linear shut off valves that are light weight with compact construction. Valves are available as manual with handwheel, or can be automated with pneumatic cylinder or electric actuator for remote operation. The arc shape of the gate of our knife gate valve is designed to be particularly suitable for cutting off fluid containing fiber or suspended particles. The knife gate valves are ideal for many applications in the process industries of Pulp & Paper, Wastewater Treatment, Mining, Sugar Making and Chemical Processing. -
Vahn-Tech DK Series knife gate valves are soft sealing shut off valves that are light weight with compact construction, and convenient to install and use. Valves are in full port design and with small flow resistance. When the gate is open, direct current flows between valve and pipeline. Valves can be operated manually with handwheel, or with automatic actuator for remote operation. The cone-shape design of the gates provides strong cutting force. The die-casting rubber seats are with bi-directional sealing. The main advantage of the valves is that when fully open, the medium will not flow into the valve chest, which prevents the pulp from settling in the valve chest and thus reducing the maintenance cost. -
Vahn-Tech DT Series knife gate valve is mainly intended for process control in pulp slurry, residue discharge and sewage treatment. It is especially suitable for installation with equipment such as stock cleaners, gravity separators and aqua pulper. -
Vahn-Tech DF Series square knife gate valve is mainly used as pneumatic on/off valve for process control in pulp making slurry or sewage treatment. It is particularly suitable to serve as a residue discharger on equipment such as stock cleaners, gravity separators and hydra pulper in the paper making industry. -
Vahn-Tech DB Series funnel knife gate valve is used in service as a pneumatic residue discharge valve in pulp making, paper making and sewage treatment. This type of valve is well suited for high consistency media containing solids, fiber or residue, serving as a residue discharge valve on stock cleaners, gravity separators or pressurized screens. The "funnel" at the bottom of the collects waste discharged from the valve body during the closing stroke. This greatly reduces the wear between the body and gate, and prolongs the life cycle of the valve. -
The Vahn-Tech Series VT-BV floating ball valves are designed to provide maximum service life and durability. Designed with extensive safety considerations including provision of locking devices, blow-out proof stems and prevention of misalignment of lever handles provide safe handling in the field. To ensure smooth plant operation, antistatic devices, fire safe seal design and cavity pressure relief features are provided. -
The Vahn-Tech Series VT-BV-TE is an API 6D compliant and monogrammed top entry trunnion mounted ball valve available in standard pipeline soft-seated configuration, as well as specialty metal-seated, high-temperature, acid gas and CO2 configurations. Seats designs can be configured as Single Piston Effect (SPE) and Double Piston Effect (DPE), providing verstatility to suit any application requirement for Double Block & Bleed and Double Isolation & Bleed. -
Vahn-Tech Series DOBF is a cost-effective butterfly valve solution for isolation valve applications. Providing lighter weight, smaller face-to-face, and simple quarter-turn rotary movement, a double-offset butterfly valve design is a great solution for zero-leakage isolation relative to ball valves for large sizes. With the eccentric disc designed to reduce the rubbing of the seat it drastically reduces torque requirements for actuation while extending seat life expectancy. -
The Vahn-Tech Series VT-BV-T is an API 6D compliant and monogrammed trunnion mounted ball valve available in standard pipeline soft-seated configuration, as well as specialty metal-seated, high-temperature, acid gas and CO2 configurations. Seats designs can be configured as Single Piston Effect (SPE) and Double Piston Effect (DPE), providing verstatility to suit any application requirement for Double Block & Bleed and Double Isolation & Bleed. -
Ceramic rubber mats provide excellent erosion, impact, and sliding abrasion resistance in severely-aggressive conveying applications. The dampening effect of the rubber backing prevents damage to the ceramic wear components, adds to mat longevity, and greatly lowers noise -
N2X stocks and distributes a full range of high-density, fine-grain, wear-resistant alumina ceramic hex mats (hexagonal tiles). Our CER-1200 grade of alumina ceramic is next to diamond in hardness, is 12 times more wear-resistant than carbon steel, and exhibits excellent corrosion resistance.Wear-resistant hex mats prevent erosion and abrasive wear in conveying and bulk material handling systems. Their flexible design allows for lining of intricate systems including fan blades, chutes, hoppers, and more. -
Ceramic tiles have excellent abrasion and wear resistant qualities and are ideal for use in transfer chutes, piping systems, hoppers, etc. Typical markets include grain, coal-fired power generation, mining, cement, and more. -
The Vahn-Tech Series VT-S Spring-Return Fail-Safe Electric Actuators in addition to the normal function (floating control, on-off control, modulating control) are designed to provide fail-safe positioning of valves and dampers upon loss of power supply. A mechanical spring set is used to position the controlled device to either the fully OPEN or fully CLOSED position without any external power source. For ON-OFF type, a mechanical buffer is employed at the end of the spring stroke in order to reduce the dynamic effects of the spring return system. A clutch-free manual override is available as an option for standard units to provide full-time manual positioning of the valve. -
The Vahn-Tech Series VT-SX Explosion Proof Spring-Return Fail-Safe Electric Actuators in addition to the normal function (floating control, on-off control, modulating control) are designed to provide fail-safe positioning of valves and dampers upon loss of power supply. A mechanical spring set is used to position the controlled device to either the fully OPEN or fully CLOSED position without any external power source. For ON-OFF type, a mechanical buffer is employed at the end of the spring stroke in order to reduce the dynamic effects of the spring return system. A clutch-free manual override is available as an option for standard units to provide full-time manual positioning of the valve. -
The Valtek GS is a fully integrated valve-actuator-instrumentation package for a continuous process, non-critical flow loop controlled throughout the plant. Engineered from the ground up, the Valtek GS has achieved optimum performance at minimum total cost. It does this by pursuing the simple design philosophy of building an instrumented control valve package that is “everything it needs to be” by providing the breadth and depth of engineered control under the Valtek trusted name. -
DiamondBack trim prevents cavitation from forming and minimizes hydrodynamic noise even in the most challenging liquid applications. Staged pressure drops eliminate cavitation by maintaining pressure above the vapor pressure, never allowing cavitation to form. DiamondBack combines new advances in pressure drop management with previously proven technologies to create the most effective device capable of eliminating cavitation in the most demanding services.
Head Office
400 – 736 6th Avenue SW
Calgary, AB T2P 3T7
Canada
Phone: 1 (855) 465-8985
Email: [email protected]
Head Office
400 – 736 6th Avenue SW
Calgary, AB T2P 3T7
Canada
Phone: 1 (855) 465-8985
Email: [email protected]
Head Office
© 2019 • N2X Process Solutions Inc.
